Wiki Titanic models
Advertisement

<object height="350" width="425"><param name="movie" value="http://www.youtube.com/v/a56WAFgoJw8"><param name="wmode" value="transparent"><embed src="http://www.youtube.com/v/a56WAFgoJw8" type="application/x-shockwave-flash" wmode="transparent" height="350" width="425"></object>

<img src="http://www.centroeu.com/shop/titanic350/02.jpg" height="290" width="600">

Maqueta 1/350 del Titanic con radiocontrol, dos servos y acelerador

Con 76 cm de longitud (y 21,6 de altura).

Esta maqueta se construye por encargo, y a petición del comprador puede ser un modelo de otra marca. El tiempo de envío desde el encargo es de hasta 3 meses, si desea un envío más rápido, contácteme para acordar las condiciones.

<img src="http://www.centroeu.com/shop/titanic350/01.jpg" height="566" width="274">

La maqueta está controlada por una radio de dos canales cuyo receptor (1) va conectado a un servo y un acelerador electrónico. La foto de abajo es de un modelo anterior con acelerador mecánico, por eso necesitaba un segundo servo que acciona el acelerador: un servo (2) mueve, por medio del un acelerador (3), el motor (4) que hace rotar la hélice central. El otro (5) hace girar el timón (6). El receptor y los servos van alimentados por cuatro pilas de 1,5 V (7), mientras que el motor principal va alimentado por una batería de 7,2 V (8), cuya corriente controla el acelerador, de modo que la maqueta puede ir hacia delante o atrás. Siguiendo este enlace puede verse una <a href="http://www.centroeu.com/shop/titanic350/titanicmedio.avi">pelí­cula (26 MB) de la maqueta</a> en movimiento.

<img src="http://www.centroeu.com/shop/titanic350/08.jpg" height="718" width="300">

<img src="http://www.centroeu.com/shop/titanic350/05k.jpg" height="266" width="300">
<a href="http://www.centroeu.com/shop/titanic350/05.jpg" target="_blank">Bigger image</a> / <a href="http://www.centroeu.com/shop/titanic350/05.jpg" target="_blank">imagen más grande</a><img src="http://www.centroeu.com/shop/titanic350/06.jpg" height="225" width="300">


Titanic 1/350 RC Model with 2 servos and speed controller


Model over 30" long and 8.5" tall. Included is the display stand.

This is a BUILT ON DEMAND model; the time to ship is up to 3 months, if you need a faster shipping please contact me before buying.

<img src="http://www.centroeu.com/shop/titanic350/03.jpg" height="559" width="237">

The model uses a 2 channel radio. The receiver (1) is connected to 1 servo and 1 electronic speed controller. The photo above shows an older model with 2 servos: one (2) moves a mechanical speed controller (3), and this one the motor (4). The other (5) controls the rudder (6). The receiver and servos run with four 1,5 V batteries (7), and the motor with a 7,2 V battery (8), controlled by the accelerator, so that the model can run forward and backwards. Follow this link to see a <a href="http://www.centroeu.com/shop/titanic350/titanicmedio.avi">film (26 MB) of this model</a> in action.

<img src="http://www.centroeu.com/shop/titanic350/09.jpg" height="220" width="300">

<img src="http://www.centroeu.com/shop/titanic350/10.jpg" height="207" width="300">

<img src="http://www.centroeu.com/shop/titanic350/12.jpg" height="90" width="300">

<img src="http://www.centroeu.com/shop/titanic350/11.jpg" height="96" width="300">

<img src="http://www.centroeu.com/shop/titanic350/07.jpg" height="990" width="266">

<img src="http://www.centroeu.com/shop/titanic350/04.jpg" height="282" width="600">

Advertisement